Free design

Inside fittings

The clever parts are behind the doors

A good kitchen or wardrobe is mostly about what happens when you open it. Every pull-out, rack and drawer here is sized to the cabinet it lives in.

Get a free designTry your wall sizes in the planner

L-shaped handleless kitchen in Light oak

Get a free design for your roomSend a few photos and rough sizes. We'll send back a design and a price range, free.

Get my free designPlan it in 3D

Sized to the cabinet

Why a pull-out has to match its cupboard

A pull-out isn't something added at the end. It's chosen with the cabinet, because the frame, the runners and the basket all depend on the cabinet's inside width. A narrow space beside the hob suits a slim pull-out for oils and spices. A wide one can take a deep pan drawer or a split recycling bin.

So the inside of every unit is drawn on your plans, fittings included. You see what sits where before anything is made, and cabinet widths are set around the fittings you want, not the other way round.

  • Matched to the inside widthBaskets and frames chosen for the cabinet's real internal size.
  • Full extensionDrawers come all the way out, so nothing hides at the back.
  • Soft close throughoutHinges and runners close quietly on their own.

See every fitting in the selection guide

In the kitchen

The fittings that make the biggest difference are often the plainest ones.

  • Deep pan drawers

    Beside the hob, deep enough for pans and lids. No kneeling to dig in a cupboard.

  • Internal drawers

    Drawers hidden behind a tall door, for a calmer front.

  • Tall pull-out larder

    The whole larder glides out, so the tins at the back are as easy to see as the front.

  • Corner pull-outs

    Swing-out or glide-out shelves that bring a blind corner into reach.

    Awkward corners

  • Dish-rack drawer

    Plates stand upright in a drawer near the dishwasher.

  • Pull-down wall-unit rack

    Lowers a high shelf down to you. Manual or electric.

  • Pull-out bins

    Waste and recycling behind a door by the sink.

  • Cutlery and spice inserts

    Dividers cut to the drawer, so nothing slides about.

  • Lift-up flaps

    Wall units that open upwards and stay out of your way.

Where the fittings live

Three units that do most of the work in a kitchen and a bedroom.

  • Drawing of a pull-out larder, 450 × 2150 × 580 millimetres

    Pull-out larder

    450 × 2150 × 580 mm

  • Drawing of a wide pan drawer unit, 800 × 720 × 560 millimetres

    Wide pan drawer unit

    800 × 720 × 560 mm

  • Drawing of a wardrobe with trouser rack, 1000 × 2400 × 600 millimetres

    Wardrobe with trouser rack

    1000 × 2400 × 600 mm

Example sizes in millimetres. Every unit is made to your measurements.

Try your own wall sizesSee it to scale in 3D, in the finish you like, then send it to a designer.

Open the plannerOrder free samples

In the wardrobe

Tell us what you own and the inside is planned around it.

Fitted wardrobe wall in Grey elm

Hanging

Pull-down rails and trouser racks

A pull-down rail brings the top of a tall wardrobe within reach, so the space under the ceiling isn't just for suitcases. A pull-out trouser rack hangs trousers flat and slides out so you can choose.

Wardrobes and a dressing table in Light ash

Dressing

Pull-out mirrors and accessory drawers

A full-length mirror that slides out from inside the wardrobe, and a divided drawer for watches, rings and belts. Both earn their place in a dressing room.

Full-height wardrobe wall with drawers and an open shelving bay

Small rooms

Shoe shelves and drawers below

Flat or angled shoe shelves, spaced for trainers and boots, with drawers underneath. In a new-build box room, a full-height wardrobe uses the space up to the ceiling that a freestanding one leaves empty. More small bedroom ideas.

  • Shelves spaced to your shoes
  • Soft-close drawers with optional dividers

Before your design, count what you own

Ten minutes with a notepad means the inside fits your household, not an average one.

  • How many large pans you have, and the widest lid
  • Tall bottles you like to keep by the hob
  • How many ways you sort your rubbish: waste, recycling, food
  • Long dresses and coats that need full-length hanging
  • Pairs of shoes and boots, and whether any boots are tall
  • Bags, belts, watches and jewellery that need a home

Questions about fittings

Anything else, send us a message and we'll talk it through.

Can fittings be added to a cabinet later?

Some can, such as cutlery inserts and drawer dividers. Pull-outs, larders and bins are best chosen with the cabinet, because the width and the runners have to match. It's worth deciding at the design stage.

Is an electric pull-down rack worth it?

It's handy on high wall units, especially if reaching up is awkward. The manual version does the same job with a gentle pull. An electric rack needs a power supply, connected by a qualified electrician.

Is a tall pull-out larder stable?

Yes. Tall units, larders included, are fixed securely to the wall, and the pull-out frame is chosen for the cabinet's height and width.

What sort of bin can I have?

The bin is chosen to fit the cabinet beside or under the sink, split into compartments to suit its width. Tell us how you sort your recycling and we'll plan around it.

Tell us what needs a home

We'll plan the inside of every unit on a free design and send a price range.

Get a free designOrder free samples